The Bradco Swing-Hoe assembly turns your Skid Steer into a Mini-Excavator, allowing you to excavate without the need to rent another machine.
The Swing-Hoe rotates 140º (70° each way), which allows you to place the soil outside of the path of your tires/tracks (72" or below skid steer).
Both the Swing-Hoe and Skid-Hoe feature a bucket linkage which improves bucket breakout and bucket rotation, high strength pins and hardened bushings for reliability.
The Swing-Hoe requires an electrical control system to switch between swing & dig. Contact IronDirect to help pick out the best electronic control system for your Skid Steer.
FREE SHIPPING WITHIN THE CONTIGUOUS 48 STATES
Includes Universal Skid Steer Mounting bracket and hoses.
Optional adjustable 3-position thumb (mechanical)
IMPORTANT: Some skid steer models require a tilt circuit hydraulic relief valve. This cartridge is IN ADDITION TO THE EXISTING RELIEF CARTRIDGE and is required to protect the circuit of the skid steer. Failure to install the cartridge when required can result in damage to the skid steer and will VOID all Bradco warranties. CASE: Models 1845C and XT units require no additional relief. DEERE: Models 4475, 5575, 6675, 7775 and 8875 require JD cartridge (JD part# MG86529091). Models 240, 250, 260, and 270 control valve EXCEPT for models with serial numbers greater than 440001 (JD240), 450001 (JD250), 460001 (JD260), 470001 (JD270) and 480001 (JD280), which require no additional relief. BOBCAT: Units with BICS do not require relief. Units without BICS but with a plug and relief on the tilt spool, require Bobcat part #6599161 to replace the plug. GEHL: Models 7600 and 7800 and MUSTANG 2095 and 2105 install Gehl part #138703. NEW HOLLAND: Install relief cartridge (NH part #86529091).